Industry News|81,000 km of Heating Pipes and One Shift: Why Valves Are Moving Up the Asset Register
On November 15, cities across northern China entered the 2026–27 heating season. The public briefings from Hebei, Tianjin, Jinan and Linzhou read less like construction reports and more like asset-management ledgers: "rehabilitated", "retrofitted", "12,000+ valves serviced". The verb has shifted from build to maintain — and the valve is the component being redefined by that shift.

1. What changed this heating season in China
Hebei's housing and urban-rural development department reported a provincial network of 1,537 heat-source plants, 23,000 substations and 81,000 km of pipes serving 1.67 billion square metres. The second half of the briefing matters more: after last season ended, 522 heat-source plants, 12,000 substations and 5,800+ km of network were rehabilitated, and 302 underperforming communities were fixed before the end of October.
Tianjin has completed 1,100+ km of ageing-pipe renewal across 16 districts and 1,600+ communities, with 576 heat-source sites now streaming data into a municipal smart-heating platform around the clock. Jinan closed out its 92 km annual renewal plan in full. Linzhou's checklist is the most concrete of all: 372 km of network patrolled, 12,000+ municipal valves serviced, 9,000+ inspection points checked.

2. Europe's answer: digital twins need instrumented hardware
The same shift is visible in Europe. On November 18, the European Investment Bank signed a €20 million venture loan with Dutch company Gradyent, whose digital-twin software is used by more than 50 district-heating networks including Helsinki, Warsaw, Vienna and Tallinn. In Bucharest, primary-network works this autumn included replacing valves along a 1,100 mm transmission main.
A digital twin can only model what it can read. Networks that are run as optimised assets need valves whose position, condition and history are accessible to the platform — wherever that platform is built.
3. The three new valve requirements
In our last post we asked the three selection questions: medium temperature, size and pressure, actuation. This season adds three maintenance questions — the requirements that are quietly redefining the valve:
| Requirement | What the network asks | What it means for the valve |
|---|---|---|
| Monitorable | What state is this valve in right now? | Position and limit-switch feedback, readable by the platform |
| Maintainable | How do we service it in the six-month off-season? | Online-serviceable trim; replaceable seats and stems; short outage |
| Traceable | Who made it, from which steel heat, tested when? | Batch numbers, EN 10204 3.1 certificates, test records on file |
Unmanned substations make this non-negotiable: Linzhou now runs 420 substations with no resident staff. Every valve action must be verifiable without a person standing next to it. Selection parameters decide whether a valve can be installed; these three decide whether it can stay.

4. What this means for specifiers
Price lifecycle cost, not unit cost — post-season maintenance routinely exceeds the discount saved at purchase. Standardise bore, flange standard and actuation across a network so spares converge and the off-season service window shortens. And put signal interfaces into the technical agreement before signing: a valve that cannot talk to the platform is a blind spot on an otherwise instrumented network.
JOLA supplies API and EN-standard butterfly, gate, check and ball valves with position-feedback options and full batch traceability for municipal heating and water networks.
Heating season is the exam; the grade is written during the six months when the pipes sit idle. Valves appear on that answer sheet more often than anything else — and operators who manage them as assets will spend next winter making fewer emergency repairs.
Sources: Hebei Provincial Department of Housing and Urban-Rural Development (Nov 15, 2026); Tianjin Municipal Government (Nov 8, 2026); Jinan Municipal Government briefing (Nov 10, 2026); Linzhou Municipal Government (Nov 16, 2026); European Investment Bank announcement (Nov 18, 2026). Industry commentary only; not procurement advice.